Installing the USB Driver for Windows

Using your Lumina 3G controller in Standard mode requires that a USB driver be installed. Connecting it is straightforward. Only the USB cable  and AC adapter adapter are needed (both included).

USB Driver Installation

When you connect the controller to your PC’s USB port and turn it on, Windows will automatically prompt you to find and install the USB driver – in most cases. However, there are instances where it does not. In that case, visit this web page. Scroll down a little, you will see a table of available USB drivers. In the Comments column, click on the link “setup executable”:

The “setup executable” link is more convenient than the drivers listed in the “x86” and “x64” columns because, when the program runs, it automatically places the USB driver files in the correct location.

Depending on your computer’s settings, you will likely need administrator priviliges to perform this one-time installation.

Last Revision: Feb 26, 2016

Products

Other Links

Stay in Touch

© Copyright 2019 Cedrus Corporation, P.O. Box 6309, San Pedro, CA 90734 - USA

Phone: +1-310-548-9595. Send us an email. See privacy policy.